Flat vulcanizing press is mainly used for vulcanizing flat belt (conveyor belt, transmission belt, referred to as flat belt, etc.), and is derived from the hydraulic press. The main function of plate curing press is to provide the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is generated by the hot medium (usually steam, heat transfer oil, etc.) and also provides superheated water.
Safety operation rules of plate curing press:
1. If the test piece is stuck to the mold, please open the mold and pay attention not to fall.
2. When placed on a flat plate, all dies should be centered. Please wear gloves to avoid scalding.
3. Adjust the pressure gauge according to the mold size and normal unit pressure to prevent overpressure and overpressure.
4. It is forbidden to stack uneven plates on the plate.
5. When taking out the test piece from the mold, pay attention to the smooth surface of the mold cavity and mold surface, and avoid scratching.
6. It is forbidden to use the plate curing machine above the specified temperature.
7. When not in use, please cut off the power supply, depressurize and close the oil valve. |