When the flat vulcanizer works, the hot plate warms up the rubber and crosslinks the rubber molecules. Its structure changes from linear structure to network structure. This is a product with certain physical and mechanical properties. However, the rubber begins to soften after being heated. At the same time, the moisture and volatile substances in the rubber must be gasified, depending on the liquid. The cylinder gives enough pressure to fill the rubber model, and restricts the formation of bubbles to make the structure of the product compact.
If it is a laminated product, the adhesive can adhere to the cloth firmly. In addition, sufficient pressure is given to prevent the phenomenon of overflow, lack of glue pattern and pore sponge from appearing on the seam surface of the die.
Flat curing press adopts PLC programmable controller and 7 Inch Touch screen. The working process is fully automatic controlled. Users can quickly modify and lock the process parameters according to their own needs, and automatically complete the closing of the mould.
Structural characteristics of plate vulcanizer:
1. The machine design structure is precise, the mould is easy to match, and the warranty is simple and clear.
2. The machine structure has long service life through computer pressure and strain analysis.
3. With the function of slow-speed calibration, the calibration is more precise and suitable for various forming conditions.
4. After grinding and nitriding, the entry and exit die has high precision steel structure, which achieves high precision horizontal table.
5. Floating track mechanism to ensure that the sliding plate and the hot disc do not friction;
